Dynam Charger Balancer LiPo 2~4 cell 12V SUPERMATE 4

Código  : 14809

de          : US$ 40.00

por        : US$ 35.00

Estoque : Não

Destalhes do Produto:

Charger Uses Align Style Balance Ports, but can also be used to charge batteries that uses Outrage XP/Thunder Power style connector with the approriate adapters.

supermate4-manual.pdf (270.84 Kb)

The Supermate 4 charger is designed to independently control the charging. Each individual cell of a battery pack (parallel charging) up to 4 cells. This type of charging requires that your pack have a separate parallel-charging connector. The advantage of this type of charging is that it eliminates the interference between cells of a battery pack during charging.

Specification:

1. Input voltage range DC 10-15V (power supply isn't included)

2. Output 8.4V (4.2V x 2) x 2, or 12.6V (4.2V x 3) x 1, or 16.8V (4.2V x 4) x 1.

3. 1.0A charging current and 4.2V charging voltage charging technique.

4.  Auto adjustment of the charging current at voltage peak region. Auto cut off when battery cellis full charged.

5.  The innovative charger for 1-4 cells of Li-on or Li-po battery packs.  It can be used to charge 4 each 1 cell pack (optional by using 2 eac switch charging cable for ports of 7.4V), or two 2 cells pack at the same time, or 1 ea 3 cells pack or 1 ea 4 cells pack.  Notice:  The charger can not charge over 4 cells at the same time.  For example, 11.1V (3cells) battery and 7.4V(2cells) battery, or 11.1V(3cells) battery and 14.8V(4cells) battery charged at the same time are not allowed.

6.  LED indication, red color for charging, green color for charger ready or battery cell full charged.

7.  Instead of charging all cells of the battery pack serially, this charger will independently control charging process of each cell of the battery pack.  It will completely eliminate the interference between cells of the battery pack during charging process.  It will also avoid the possibility of burnt or explosion caused by a problem battery pack with defective cell inside.

8.  Sturdy aluminum case & exhaust fan for maximun heat dissipation.

9.  Auto cut off charger operation when voltage of the power source is lower than 9V.  Alll LED will be light off.

10.  Size:  130x80x30mm. 

11. Weight:  290g

Produtos Relacionados

Phoenix e Hughes 300 Swashplate set PH003 US$ 7.00 Cód: 12690	Cristal TX/RX Single Convertion 72.250 Canal 23 Dynam Compativel com Futaba e Hitec US$ 15.00 Cód: 15752	Dynam AM 27mhz 2CH receiver 02071 US$ 20.00 Cód: 19378	VTX-006 Main Blade Grip Set US$ 7.00 Cód: 19507
Helicóptero Eletrico Orbiter Coaxial 4CH RTF C/ Cabo Simulador USB Dynam US$ 150.00 Cód: 22491	Phoenix charger 110v 8.4v PH027 US$ 12.00 Cód: 30434	Micro Servo Dynam 8G 1.5kg .12Seg US$ 10.00 Cód: 6507	Phoenix 4/6ch Landing Set PH009 US$ 6.00 Cód: 12751

Lista Texto

14/04/2012

Lista PDF

14/04/2012

Lista Excel

14/04/2012

Login Senha