Instruction(3GX Programmable Flybarless System) :
|Specification(3GX Programmable Flybarless System) :|
|œBrand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
œ3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
œBased on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
œGraphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
œSupport Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
œWith 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
œA library of pre-configured 3GX settings specifically available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters.
œThree levels of flight mode is available on the 3GX to provide different feels from beginners to advanced pilots.
œCustom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
œ3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
œSuitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
œ3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
œWith built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
œ3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
œAdditional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
|œOperating Temperature:-10~60 degree
œX and Y axis Operating Angle Range:-300~+300 degree
œZ axis Operating Angle Range:-600~+600 degree
œSize:36.5x25.2x15.6 mm Size
œSupports Wide/Narrow Bandwidth Digital and brushless servos
œSpektrum and JR Satellite antennas support (Replaces original factory receiver)
œFutaba S.BUS system support
œBuilt in governor function
œMaximum working voltage:8.5V
œCompatible with 1024/2048 resolution Spektrum receivers
œSupports 90/120/135/140 CCPM swashplates
œField setup without the use of a PC
œCompatible with 2 to 5 blades rotor heads
œSupport up to 6 servos
œAutomatic servo type recognization
|Specification(T-REX 600EFL PRO Super Combo) :|
|œ Length: 1160mm
œ Height: 353mm
œ Width: 210mm
œ Main Blade Length: 600mm
œ Main Rotor Diameter: 1347mm
œ Tail Rotor Diameter: 260mm
œ Motor Drive Gear:13T
œ Main Drive Gear:112T
œ Autorotation Tail Drive Gear: 131T
œ Tail Drive Gear: 34T
œ Drive Gear Ratio: 1:8.61:3.85
œ Weight(With Motor): 2290g
œCorrection of TREX 600EFL 3GX manuals:(Click me)
|Specification(T-REX 600EFL PRO Super Combo) :||Accessories:|
1.New aerodynamically efficient low drag flybarless head assembly,with detachable blade grip pitch arm for ease of maintenance.
2.The frame utilizes 2mm carbon fiber plates of the highest spec. Patented composite material construction technique cleverly utilize frame space that improved overall rigidity, and also created a minimalistic beauty.
3.Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
4.Top mounted motor base bringing the motor’s center of gravity closer to rotating disc, improving 3D agility.
5.Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries.
6.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
7.Heatsink embedded into motor mount for effective cooling of motor.
8.Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
9.Utilize direct link CCPM swashplate control system to enable direct and fast control response. Specially designed anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
10.Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
11.Ergonomically designed H-shaped electronic mount to provide flexible organization or equipment, and minimize wire clutter.
12.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
13.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
14.Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
15.Tail pitch mechanism equipped with high precision bearing.
16.High speed thrust bearings in tail blade grips.
17.New lightened landing gear assembly with lower center of gravity.
18.High quality painted fiberglass canopy with 4-point quick release mounts.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
|œT-REX 600EFL PRO Kits Set X1
œAluminum Tail Boom X1
œ600 3G Carbon fiber blades X1
œ600MX Brushless Motor(510KV) X1
œDS610 Digital servoX3
œDS650 Digital servo X1
œ3GX Flybarless System X1
œCastle ICE HV 80 Brushless ESC X1
œ6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
œCorrection of TREX 600EFL 3GX manuals:(Click me)
T-Rex 250 Metal Washout Base H25010
T-Rex 450 Sport Stainless Steel Linkage Rod H45106
T-Rex 250PRO Matal Anti Rotation Bracket H25116
T-Rex 450 Main Shaft H45022A
Align 20A Brushless ESC RCE-BL20A [K10248A]
Align M1 Engine Helical Gear Set/14T HN7126
T-REX Linkage Ball HS1027
T-REX 700 Nitro 3GX Super Combo KX018008A
GABA HOBBY © 2011 - Todos os direitos reservados. Preços e estoque sujeitos à alterações sem prévio aviso.
Shopping Del Este n°136, Anexo a Aduana
Ciudad Del Este - Paraguai
Telefones: 00XX 595 61 505 902 / 511 182