Construction: Balsa and ply Covering: High quality heat shrink covering Wing: One-piece, NACA airfoils, aluminum wing joiner Aileron Control: Dual servo Cowl: Painted fiberglass Canopy: Dual, clear molded plastic construction, painted-on frame lines, painted pilot and copilot busts Landing Gear: Retract and CNC strut gear (requires installation) molded plastic landing gear covers Wheels: Three 2" (51mm) foam Spinner: Plastic construction, red in color 2.3" (58mm) diameter Fuel Tank: Approximately 10oz (300cc) Engine Mount: Two-piece composite construction Motor Mount: Unassembled plywood
ARF T-6 Texan II with Engine Mount, Landing Gear, Wheels, Pilot and Copilot Busts, Instrument Panel Decals, Motor Mount, Spinner Instruction Manual
REQUER PARA COMPLETAR O KIT
Radio:6 channel minimum Servos:6 standard, 2-aileron; 1-elevator; 1-steering nose, 1-rudder 1-throttle (if using glow engine), 2-retract servos, Futaba S3170G recommended Receiver Battery: 4.8-6V 800-1200mAh NiMH Building and field equipment
Electric Power: Brushless Outrunner: 1000-1400 W 480Kv, Great Planes Rimfire .46-.55 recommended ESC: 50-80A Battery: 4-6 cell Lipo 4000-5500mAh Battery Charger: Compatible with selected battery LiPo charging bag, propeller, field equipment
Glow Power; Engine:46-.55 cu in 2-stroke, or .52 cu in 4-stroke Fuel: Airplane blend, 5-20% nitro content Propeller to match selected motor
Wingspan: 58.6" (1490mm) Length: 50" (1270mm) Airfoil: Semi-symmetrical Flying Weight: 7.05-7.50lbs (3200-3400g) Wing Area: 604 sq in (39 sq dm) Wing Loading: 26.87 oz/sq ft (82 g/sq dm) Servo Mount: 0.83 x 1.6" (21 x 42mm) Center of Gravity: 3.5 - 3.9" (90 - 100mm) back from the leading edge of the wing measured at the fuselage Control Throws; Low High Ailerons up/down: 0.31"(8mm)10% expo 0.39" (10mm) 10% expo Elevators up/down: 0.31" (8mm) 12% expo 0.39" (10mm) 12% expo Rudder right/left: 0.59" (15mm) 15% expo 1.6" (40mm) 15% expo
If a replacement fuel tank is needed, the DuBro 10oz square fuel tank (DUBQ0210), or the Sullivan 10oz Rectangular Tank (SULQ1428) can be used. Some trimming and modification to the fuselage may be required when installing any aftermarket tank.