Construction: Balsa and ply Wing: Two-piece with aluminum joiner tube, NACA airfoils Aileron Control: Dual servo Covering: High quality heat shrink covering Cowl: Fiberglass construction, painted to match covering scheme Landing Gear: Aluminum prebent main gear, spring wire steerable tail gear Wheels: Main --" (--mm) diameter, --" (--mm) diameter tail gear Wheel Pants: Plastic construction, yellow in color Spinner: Red plastic " ( mm) diameter Fuel Tank: --oz (--cc) Engine Mount: Two piece composite Motor Mount: Plywood
Radial Rocket Airplane with Landing Gear, Wheels, Wheel Pants, Spinner, Fuel Tank, Motor Mount, Engine Mount, Instructions and Pilot Figure
REQUER PARA COMPLETAR O KIT
Radio: At least 4-channel Servo:5 standard: 2-aileron, 1-elevator, 1-rudder, 1-throttle Receiver Battery: 4.8-6V 800-1200mAh Glow Power; Engine:.46-.55 cu in 2-stroke or .52 cu in 4-stroke Propeller: Depending on selected engine Electric Power; Motor: RIMFIRE .46-.55 ESC: 50-80A Lipo Battery: 5-6S, at least 4000mAh with LiPo charging bag Battery Charger: Compatible with selected LiPo battery
Building and field equipment
Wingspan: 55.4" (1406mm) Length: 48.5" (1231mm) Flying Weight: 6.0-6.6 lb (2700-3000 g) Wing Area: 480 sq in (31 sq dm) Wing Loading: 29.4 oz sq dm (90g/sq dm) Servo Mount: 0.83 x 1.6" (21mm x 42mm) Center of Gravity (CG): 2.9" (75mm) back from the leading edge of the wing at the fuselage Control Throws: Low High Ailerons: 8mm 10% expo 10mm 10% expo Elevator: 8mm 12% expo 10mm 12% expo Rudder: 25mm 15% expo 40mm 15% expo
Electric set-up requires a 5S-6S 4000-5500mAh LiPo battery.
A two-piece wing and aluminum joiner tube results in fast, easy assembly.