This is the radio controlled, glow powered, Almost-Ready-to-Fly, Phoenix Models Sea Bee Sport/F3A Pattern Airplane. For Intermediate to Advanced Modeler/Fliers.
FEATURES: Construction: Balsa and plywood Wings: One-piece all wood Covering: Factory applied adhesive backed, color scheme is Red and White with Blue and Yellow accents, Black lettering and Black stars Radio Compartment: Easily accessible over wing, plywood reinforced Cowling: Pre-painted, fiberglass-reinforced Wheel Pants: Pre-painted, fiberglass-reinforced Canopy: Single, clear with painted and detailed pilot bust Landing Gear: Two-piece pre-formed aluminum 0.16" (4mm) thick with two 2-1/4" (57mm) main wheels and tailwheel wire with 1" (25mm) tailwheel Spinner: 2-1/4" (57mm) Red plastic Aileron Control: Dual servo Building Time: Ready to fly in several hours
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent main landing gear, tailwheel wire and wheel, main wheels mounted aluminum non-adjustable engine mount, fuel tank, spinner foam padding, pilot bust, wood servo trays and wing joiners, hardware package, decal sheet and photo-illustrated instructions
REQUIRES: Engine: .46 cu in (7.5 cc) high performance 2-stroke OR .52 cu in (8.5 cc) 4-stroke Muffler: Sports-style supplied with engine, cowl requires trimming to accomodate engine and muffler Radio: 4-Channel Servos: 5-Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder) Servo Extension 6": Two for aileron servos Y-Harness: One for aileron servos Misc. Items: Glow plug, medium fuel tubing, fuel filter, propeller, building and field equipment.
SPECS: Wingspan: 55.1" (1400mm) Weight: 6.1lb (2780g) Length: 53.9" (1370mm) Specs such as Wing Area and Wing Loading are not provided by the manufacturer Airfoil: Fully-symmetrical, mid-wing Center of Gravity: 4.3" (110mm) Back from the wing's leading edge at the fuselage Control Throws- High Rate Elevator: Up & Down 0.47" (12mm) Rudder: Right to Left 1" (25mm) Ailerons: Up & Down 0.39" (10mm) Right thrust: 2°