Disponibilidade: Este produto está esgotado
Aviso: Últimas unidades!
Data de disponibilidade:
Ready to be a favorite right from the start!
A pilot may own many planes, but there's always one that stands out as the all-time favorite. And that's what the Escapade was meant to be. Any pilot who's mastered a trainer can fly it with confidence -- and any pilot who's flown it once will want to fly it again. Easy handling and aerobatic performance are two good reasons. Assembly ease and incredible value — and mounts for both glow and electric power — make it a hands-down choice now and a take-along favorite anytime.
Assembles in just 4-6 hours — and excels with 2-stroke, 4-stroke or brushless power!
Time-savers include prehinged control surfaces, an assembled fuel tank and bolt-on wing and tail surfaces, landing gear and wheel pants.
All control surfaces are prehinged.
Ailerons can be set up for single-servo simplicity or dual-servo authority with no modification.
Built-up airframe offers fast, bolt-together assembly and a striking MonoKote trim scheme.
Other performance and appearance pluses: painted fiberglass wheel pants; a painted pilot bust; aluminum landing gear; easy-access LiPo battery hatch; steerable tailwheel assembly; and easy-to-install mounts for glow engines and brushless motors.
All control surfaces are prehinged! The ailerons can be set up for one- or two-servo operation, without modifications.
The two-piece wing assembles quickly, providing accurate alignment automatically.
Bolt-on tail surfaces drastically cut assembly time!
The fiberglass wheel pants are factory-painted to match the MonoKote trim scheme.
The Escapade performs well with glow or electric power, and either power option installs with virtually "foolproof" ease. Included mounts are drilled to make many installations drop-in simple.
Removing the factory-built battery "hatch" also gives you easy access to onboard gear. Magnets in the hatch and fuselage provide a strong bond and a simple way to reattach the hatch after use.
The Escapade is covered in a one-of-a-kind MonoKote trim scheme — and complemented by painted wheel pants.
Construction: Balsa and ply
Covering: Covered in Top Flite MonoKote
Wings: One-piece with aluminum joiner tube
Aileron Control: Modeler's choice of single or dual servo control
Radio Compartment: Plywood reinforced
Canopy: Single tinted, hatch attaches to fuselage with magnets, preinstalled painted pilot bust
Fuel Tank: 9.1oz (270cc)
Landing Gear: Left and right aluminum sections 0.12" (3mm) thick
Wheels: Main, foam 3" (76mm) diameter, tailwheel 0.87" (22mm) diameter
Wheel Pants: Painted fiberglass
Spinner: Plastic, red in color 2.5" (63mm) diameter
Engine Mount: Two-piece composite
Motor Mount: Plywood
Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at the date of purchase.
Great Planes Escapade Sport Airplane, landing gear, wheels, motor mount, engine mount, fuel tank, spinner, landing gear, pilot bust and instruction manual.
Servos: 3-5 standard size Engine .40 - .55 cu in (6.5 - 9.0cc) 2-stroke glow OR .52 - .70 cu in (8.5 - 11.5cc) 4-stroke glow OR
Electric Motor: .46 RimFire (42-60-800kV)
Battery: 14.8V (4S) 3200mAh LiPo (if using electric motor)
Electronic Speed Control: 60 amp (if using electric motor)
Charger: LiPo compatible charger and cell balancer (if using electric motor) 6" (152mm)
Servo Extension: Two for single servo aileron control Dual Servo Extension required for dual servo aileron control 1/4" foam rubber padding, propeller, building and field equipment.
Wingspan: 52.5" (1340mm)
Wing Area: 483 sq in (31.2 sq dm)
Weight: 5.0 - 5.5lb (2270 - 2495g)
Wing Loading: 24 - 26 oz/sq ft (73 - 80 g/sq dm)
Length: 46" (1160mm)
Airfoil: Semi-symmetrical, low wing configuration
Center of Gravity: 2-1/2" (63mm) Back from the wing's leading edge at the fuselage sides.
Control Throws - Low Rate - High Rate
Ailerons: Up & Down 1/4" (6mm) 11° 1/2" (13mm) 22°
Elevator: Up & Down 3/4" (19mm) 15° 1-1/4" (32mm) 25°
Rudder: Right & Left 1-1/4" (32mm) 17° 2" (51mm) 26°