This is the electric powered, radio controlled, almost ready to fly,
ElectriFly by Great Planes Sequence F3A 50" E-Performance XLC Series Airplane.
FEATURES: Construction: Balsa and plywood with prebuilt plywood motor box
Wings: Two piece with carbon wing joiner
Rudder Control: Pull-pull system
Aileron Control: Dual servo, factory hinged
Cowl: Painted fiberglass
Wheel Pants: Painted fiberglass
Canopy: Magnetically attaches to fuselage
Covering: Covered in six colors of Top Flite MonoKote
Landing Gear: Two piece painted fiberglass main with tailwheel wire
Wheels: Foam, main 2.25" (56mm), tailwheel .75" (19mm) diameter
Spinner: 2" (51mm) diameter, white in color
Building Time: Ready to fly in 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase.
INCLUDES: Great Planes Sequence F3A 50" E-Performance XLC Series Airplane with
wheels, canopy, wheel pants, prebuilt motor box, decals and
REQUER PARA COMPLETAR O KIT:
Servos: 4 micro (digital servos recommended for best performance)
12" (305mm) Servo Extensions: Two for aileron servos
6" (152mm) Servo Extension: One for ESC
6" (152mm) Dual Servo Extension: One for aileron servos
Motor: Brushless outrunner, Great Planes RimFire .32 (42-50-800)
ESC: 45A brushless if using recommended motor
Propeller: 12x6E if using recommended motor
Battery: 2100mAh 14.8V Lithium Polymer
Charger: LiPo compatible with cell balancer or separate cell balancer
if charger is not so equipped
Building and field equipment
SPECS: Wingspan: 50" (1270mm)
Wing Area: 505 sq in (32.6 sq dm)
Wing Loading: 16-17 oz/sq ft (49-52 g/sq dm)
Length: 51.5" (1310mm)
Weight: 3.5 - 3.75 lb (1590 - 1700 g)
Center of Gravity (CG): 4-7/8" (124mm) back from the leading edge of
the wing measured at the fuselage
Low Rate High Rate
Elevator: 1/4" (6mm) 5° 3/8" (9.5mm) 7°
Rudder: 1" (25mm) 12° 2" (51mm) 24°
Ailerons: 1/2" (13mm) 11° 3/4" (19mm) 15°
Sequence Almost Ready-to-Fly 50
See unlimited pattern performance in a whole new light!
The Sequence is the first-ever pattern ship in the ElectriFly line – and it's like no other pattern ship you've ever seen before. The airframe is exceptionally strong and ultra-light, to make the most efficient use of a brushless motor and LiPo power. Its performance benefits from features drawn from today's most competitive custom ships. In looks and performance, it's the equal of much larger pattern competitors at home or abroad, as well as a clear winner in modern assembly ease.
Engineered for crisp response, smooth handling and straight-as-a-string tracking.
No expense has been spared in engineering a spirited performer that even the most discriminating pilot will appreciate.
Designed with a prebuilt motor box, self-aligning wheel pants and more!
Sequence F3A EP ARF
Sequence F3A EP ARF Action Shots
The Sequence’s design features and brilliant 6-color MonoKote trim scheme show an international flair
The Sequence’s design features and brilliant 6-color MonoKote trim scheme show an international flair, but the construction and assembly ease are all ElectriFly XLC. Bold graphics on the wing bottom make it easy to orient the Sequence at a glance.
The motor box is prebuilt
The motor box is prebuilt. No measuring or cutting required; drive in four screws and you're done. The cowl ring and magnets are factory-aligned and installed for ease and clean, uncluttered looks.
The canopy/battery hatch attaches with factory-installed magnets
The canopy/battery hatch attaches with factory-installed magnets. It lifts off easily, for effortless battery changes.
spacer Airfoiled tail surfaces improve both tracking and handling precision
Airfoiled tail surfaces improve both tracking and handling precision. They're common on custom-built pattern ships and a performance plus built into the Sequence's design. Ailerons are factory-hinged for your convenience.
Assembly takes just 4-6 hours from start to finish.
Assembly takes just 4-6 hours from start to finish. A prebuilt and factory-covered balsa airframe, carbon fiber and painted fiberglass parts reduce work and weight simultaneously. Other assembly aids include a prebuilt motor box and self-aligning wheel pants.
Please note: all recommendations were the best choices available at the time of product release.
FUTM0303 Futaba® S3150 Digital Slim Servo (4)
GPMG4700 ElectriFly RimFire™ .32 Out-Runner Brushless Motor
GPMM1840 ElectriFly Silver Series 45A Brushless ESC
GPMP0618 ElectriFly Power Series 14.8V 2100mAh Balanced 20C LiPo Battery
FUTL7627 Futaba R617FS 7-Channel FASST™ Receiver
FPWP4197 FlightPower™ EON-X Lite 2100 4S 14.8V LiPo Battery
GPMA3378 Carbon-Fiber Landing Gear
GPMP0624 ElectriFly Power Series 14.8V 3200mAh Balanced 25C LiPo Battery..
Stock Number: GPMA1575
Wingspan: 50 in (1270 mm)
Wing Area: 505 in² (32.6 dm²)
Weight: 3.5-3.75 lb (1590-1700 g)
Wing Loading: 16-17 oz sq/ft (49-52 g/dm²)
Length: 51.5 in (1310 mm)
Requires: 4-channel radio w/4 micro servos, 800kV outrunner brushless motor, 45A ESC (min) & 14.8V mAh LiPo battery.