Tech One Mini Yak 54 3D EP ARF 16.5' TOHA1048

This is the electric powered, radio controlled, almost ready to fly,
            Mini Yak 18" EPP Flat Foam Monoplane from Tech One.
       For flying indoors or outdoors at dawn or dusk on windless days.

FEATURES: Construction: EPP foam with carbon fiber truss system to add strength
            and eliminate flex
          Wings: One-piece
          Aileron Control: Single servo
          Landing Gear: Rods with .75" (19mm) foam wheels, foam wheel covers
          Pushrods: Carbon fiber
          Building Time: Ready to fly in approximately three hour

INCLUDES: Mini Yak 18" Flat Foam Monoplane with landing gear, pushrods,
            hardware and instruction manual

REQUIRES: Radio: At least 4-channel
          Servos: Three micro high-torque 2.5g (1-ailerons, 1-rudder,
             1-elevator)
          ESC: 7A brushless capable
          Motor: 3700kV, Tech One offers a Micro Flight Pack that includes a
            brushless motor, 7A ESC, three 2.5g servos and prop (TOHM1020)
          Battery: 2S 200mAh LiPo
          Battery Charger: LiPo compatible
          Building and field equipment

SPECS:    Fuselage Length: 18.0" (458mm)
          Wingspan: 16.5" (418mm)
          Flying Weight: 1.6 - 1.9oz (45 - 53g) with battery
          Center of Gravity (CG): 1.81" (46mm) from the leading edge of the
            wing, measured at the center of the wing
          Control Throws*             Sport               3D
            Ailerons: Up and Down   0.83" (21.2mm)      2.30" (58.3mm)
            Elevator: Up and Down   0.63" (16mm)        1.89" (48mm)
            Rudder: Right and Left  0.98" (24.8mm)      2.93" (74.4mm)
          *Control throws are measured at the widest point of the control
            surfaces
          Exponential                 Sport               3D
            Ailerons:                  20%              45-55%
            Elevator:                  20%              45-60%
            Rudder:                    20%              45-60%