Chat - Gaba Hobby Atendimento Online - Gaba Hobby CDE
Fabricante: ARRMA

ARRMA 1/10 Raider Buggy MEGA Brushed 2.4GHz RTR ARAD35


Disponibilidade: Em Estoque

Aviso: Últimas unidades!

U$ 139.00

10x de U$ 13.90
Valor oficial: U$ 139.00



*Os valores não incluem I.V.A. – Imposto ao Valor Agregado (obrigatório para residentes no Paraguai) e podem sofrer alterações sem prévio aviso


2014 models include all 2013 updates, as well as a number of
additional refinements:
-LiPo ready waterproof electronics capable of running in rain,
-Chassis re-engineered for greater rigidity, more strength
and easier access
-Impact-resistant battery box with door and foam padding
-Molded-in servo wire channels for neater installations and
greater padding
-Compatibility with all optional alloy parts designed for BLX
-Composite transmission gears for lower rotational mass and faster
-Molded camber and steering links
-Easily accessible steering servo

Chassis: Composite, with battery door that adds to structural
rigidity and enables driver to change batteries without removing
the vehicle's body, internal channel protects wiring from damage,
alloy TVPs on Arrma's BLX brushless chassis are also compatible
with this chassis and may be added for greater rigidity
Drive: Rear wheel with steel driveshafts and axles
Motor: Arrma 540 size MEGA 15T brushed
Radio: ATX100 2.4GHz 3-channel with lightweight ARX100 receiver,
with trims, servo reversing & dual-rate steering
Electronic Speed Control: Waterproof, LiPo compatible, withstands
40A continuous draw
**If wanting to use a LiPo battery a 2S is recommended. If using
a 3S, a hard shell pack is recommended, LiPo batteries must have a
connector to mate with the ESC. When switching to a LiPo
follow instructions carefully for changing jumper in ESC.**
Receiver Box: Water proof and dust proof
Battery: 2000mAh 6-cell 7.2V NiMH, chassis accepts 7-cell battery
with no modifications
Battery Charger: Wall type charger
Body: Trimmed and painted
Transmission: Lightweight composite
Differential: Metal internal gears
Suspension: Fully independent, screw type hinge pins
Shocks: Composite body, oil-filled
Tires: dBoots Dunerunner with dBoots foam inserts
Front, 1.2" (30mm) wide, 3.3" (85mm) diameter
Rear, 1.6" (40.5mm) wide, 3.3" (85mm) diameter
Wheels: Six spoke, 12mm hex
Front, 1.1" (29mm) wide, 2.2" (56mm) diameter
Rear, 1.6" (41mm) wide, 2.2" (56mm) diameter
Caster: Non-adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Non-Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank type with servo saver, composite linkages
Warranty: Two year limited warranty beginning at date of purchase



RTR Raider Baja Buggy with printed Body and 2.4GHz Radio, ESC,
Steering Servo, Brushed Motor, Tires, Wheels, Foam Inserts,
Decals Instruction Manual, Battery, Charger



AA Batteries: Four for transmitter
Building and track equipment



Length: 15.75" (400mm)
Width: 10" (253mm)
Height: 5.5" (140mm)
Wheelbase: 11.4" (290mm)
Ride Height: 1.2" (30mm)
Weight: 3.1lbs (1.42kg) without battery
Length: 10.1" (257mm)
Width: 4.5" (114mm) at widest point
Height: 3" (76.2mm)


For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x13mm Rear Wheels 2 ARAC3201
2 10x15mm Diff Gear 1 DTXC1595
4 5x10mm Gearbox 2 DTXC1535