Disponibilidade: Este produto está esgotado
Aviso: Últimas unidades!
Data de disponibilidade:
This is the glow powered, 2.4GHz radio controlled, ready to run, 1/10 scale Nissan 350Z VX Touring Car from Thunder Tiger.
FEATURES: Chassis: Anodized aluminum alloy 0.12" (3mm) thick Drive: Four wheel shaft drive fully ballraced Engine: Pro-18BX 18cu in (3.0cc) with pull starter (TTRG0018), glow plug and foam air filter Exhaust: Aluminum tuned pipe, polished natural finish Radio: Cougar P2 IFHss system with two standard servos Bumper: Front foam Differentials: Bevel gear Transmission: Two-speed automatic Clutch: Two shoe composite Steering: Bellcrank type with servo saver and one-piece resin steering turnbuckles Shocks: Composite body, oil filled Body: Nissan 350Z coupe trimmed and painted with decals for lights, grille and body trim Wheels: Chrome plated plastic 1.02" (52mm) diameter, 1.02" (26mm) wide Tires: Slick rubber 1.02" (26mm) wide, 2" (52mm) diameter with foam inserts Ball Bearings: Full set, sealed Suspension: Double wishbone Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Warranty: Thunder Tiger guarantees this truck to be free from defects in both material and workmanship. This warranty does not cover any components damaged by use or modification. A part or parts missing from the kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase
INCLUDES: RTR 1/10 scale Tomahawk Touring Car with .18 cu in engine, 2.4GHz radio, painted body and instruction manual
REQUIRES: Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break-in) AA Batteries: 12, 8 for transmitter 4 for battery box Building and track equipment
SPECS: Vehicle; Length: 17" (432mm) Width: 7.87" (200mm) Height: 4.33" (110mm) Weight: 3.63lbs (1650g) Wheelbase: 10.43" (265mm) Body; Length: 17.1" (434mm) Width: 8.1" (205mm) Height: 4" (102mm)
COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 8x14mm Fr Diff 1 DTXC1583 2 8x14mm Rear Diff 1 DTXC1583 2 5x14mm Transmission 2 5x14mm Fr Drive Axle 4 10x15mm Fr Hubs 2 DTXC1595 4 10x15mm Rear Hubs 2 DTXC1595 4 5x8mm Steering Bellcrank 2 DTXC1523 1 5x8mm Clutch 1 DTXC1523 1 5x10 Clutch 1 DTXC1535