Disponibilidade: Este produto está esgotado
Aviso: Últimas unidades!
Data de disponibilidade:
Put Two 700W Charger Together - SkyRC Ultimate Duo 1400 Watt Balance Charger / Discharger
SKYRC Ultimate Duo 1400 Watt is a twin channel charger with Two independent circuits which can charge two different type of batteries simultaneously. Also it's a high performance, micro processor controlled charge / discharge station with battery management suitable for use with all current battery types. In Syncro mode when charging two sam batteries, both charging channels can be set by channel one. What's more, user could also use it as Lithium Battery Meter and Lithium Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temp. Threshold and Processing Time Limit which makes the charge safe to use.
What's good about the SKYRC Ultimate Duo 1400W High Power Charger?
Optimized Operating Software
Ultimate Duo 1400W features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles in each channel for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
When charging two same batteries, both charging channels can be set by channel one.
PC Control Software “Charge Master”
The free “Charge Master” software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in real-time graphs. And you can initiate, control charging and update firmware from “Charge Master”.
LiHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.
Internal Independent Lithium Battery Balancer
Ultimate Duo 1400W employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, Ultimate Duo 1400W can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
Ultimate Duo 1400W is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe and LiHV series of batteries.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery's activity.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged.
Delta-peak Sensitivity for NiMH/NiCd
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
LiPo Battery Meter
The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage.
Battery Internal Resistance Meter
The user can check each cell's internal resistance.
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. This function is available by connecting optional temperature probe, which is not included * in the package.
Processing Time Limit
You can also limit the maximum process time to avoid any possible defect.
To withstand the monstrous 1400 Watt power, it's gotta be expensive material inside, can't go wrong with it.
You have so many battery types with different connectors? Fine, don't connect the main battery leads, just charge with the Balance Port.
* this trick only works for small batteries.
Control the Charge thru PC
You'll see graphs and charts about the Li-Po Battery which looks very tech. (* USB Cable sold separately).
SKYRC Ultimate Duo 1400W / 30A Specifications :
Dimension : 200mm (w) x 140mm (l) x 55mm (h)
Weight : 1220g
LiPo/LiFe/Lilon/LiHV Battery Cell Count : 1S~8S
Memory: 10 different charge/discharge profiles in each channel
DC Input Voltage : 11~30V
Charge Circuit Power : 700W X 2
Discharge Wattage: 30W X 2
Balance Port Charge Current : 800mA per cell
Discharge Current : 0.1-8.0A
Regenerative Discharge Current : 0.1-40.0A
Current Drain for Balancing : Max. 800mA
NiMH/NiCd Battery Cell Count : 1-20S
Trickle Charging Current : 50mA-300mA & OFF
Reading Voltage Range : 0.1-34.8V/cell
Pb Battery : 2-24V
Charge Cutoff Temperature : 20-80ºC(adjustable)