350464
Disponibilidade: Em Estoque
Aviso: Últimas unidades!
Data de disponibilidade:
SPEED. POWER. PERFORMANCE.
The Losi® Ford Raptor Baja Rey® is the most authentic looking Desert Truck on the market with the performance and durability of a race vehicle. Officially licensed, it comes equipped with a Dynamite® 3800Kv brushless power system, as well as a solid rear axle, independent front suspension, and roll cage with upright shocks, so you can tear across all types of rocky off-road terrain. And you'll do so with the full-throttle freedom that only AVC® technology can provide. Just like the full scale Ford Raptor, the onboard traction control allows you to fly across the desert at speeds in excess of 50mph all while in complete control and completely dialed in. You get an authentic off-road racing experience with injection molded details, light bars and two licensed trim schemes. The Ford Raptor Baja Rey has just raised the bar another level.
The Losi Ford Raptor Baja Rey is the most authentic desert truck on the market. Engineered to race, the Baja Rey's 4-link suspension and true-to-scale body make it supreme desert racer.
What's in the Box?
(1) Ford Raptor Baja Rey: 1/10 4WD RTR Desert Truck
(1) Spektrum™ 6-Channel DSMR® AVC Surface Receiver (installed)
(1) Spektrum™ 9KG 23T Waterproof Servo (installed)
(1) Dynamite® Fuze™ 130A Sensorless Brushless Waterproof ESC (installed)
(1) Dynamite® Fuze™ 550 Brushless Motor 3800Kv (installed)
(1) Spektrum™ DX2E 2.4GHz Transmitter
(4) AA Batteries (for transmitter)
(1) Product Manual
Type:Desert Truck
Scale:1/10
Length:21.6" (540mm)
Width:12.6" (320mm)
Height:7.6" (190mm)
Ground Clearance:2.2" (55mm)
Wheelbase:14.6" (370mmm)
Weight:6.1 lbs (2.8kg)
Chassis:0.12" (3mm) thick aluminum
Suspension:Front, independent, Rear 4-link
Drivetrain:4WD Shaft Drive
Tire Type:Desert Claws, 4.45" (113mm) diameter
Motor or Engine:550 size motor
Speed Control:Dynamite Fuze 130A
Radio:Spektrum DX2E transmitter with 6-ch DSMR AVC surface receiver
Servos:Waterproof metal gear steering servo
Batteries:One 2 or 3S at least 5000mAh hardcase LiPo required
Charger:LiPo compatible required
Gear Pitch:1.0 Module
Wheel Size:2.3" (58.4mm) wide, 2.2" (56mm) Outer Diameter, 3.0" (76mm) Inner Diameter
Kit/RTR:RTR
Shock Type:Oil-filled, front 3.9" (100mm), 4.8" (122mm) rear
Body:Four piece screen printed 2018 Ford Raptor licensed body
Ball Bearings:Full set
Assembly Time:Less than 1 Hour
• 2S or 3S Hardcase LiPo battery with EC3 or IC3 connector
• Apprioriate LiPo charger