Fabricante: O.S. ENGINES

O.S. Engines FS200S Ring 80N Carburetor F6010 Muffler 35940


Disponibilidade: Em Estoque

Aviso: Últimas unidades!

U$ 499.00

10x de U$ 49.90
Valor oficial: U$ 499.00



*Os valores não incluem I.V.A. – Imposto ao Valor Agregado (obrigatório para residentes no Paraguai) e podem sofrer alterações sem prévio aviso

This is the O.S. Max 2.00 FS-200S Surpass Four Stroke Engine.



Ideal for scale and sport aircraft

80N carburetor can be reversed 180° for easy adjustment

Multi-directional F-6010 silencer for mild 4-stroke sound

Two year limited warranty



O.S. Max 2.00 FS-200S Four Stroke Engine with type "F" glow plug, F-6010 muffler, header pipe, instruction manual.



Fuel: 5-30% nitro with at least 18% lubricant content

Propeller: 15x12-14, 16x12-14, 17x10-13, 18x6-10, 17x12-13, 18x8-12, 20x8 (break-in engine with prop intended for use on model)

Electric Starter: High torque

Glow starter and field equipment



Displacement: 1.98 cu in (32.4cc)

Bore: 1.50" (38.0mm)

Stroke: 1.13" (28.6mm)

Practical RPM: 1,800 - 10,000

Output: 2.9 ps /9000 RPM

Weight: 32.8oz (930g) without muffler 34.2oz (970g) with muffler

Crankshaft Thread Size: 5/16-24

Break-in Carburetor Settings;

Needle Valve: 3-4 turns open from fully closed

Idle Mixture: Slightly rich (45-60°) from highest RPM setting

Mixture Control Valve: 3 turns in from counterclockwise

Distance Between Mounting Holes Same Side: 0.98" (25mm)

Distance Between Mounting Holes Opposite Side: 2.3" (58mm)

Height from Crankcase Bottom to Rocker Cover: 5.7" (144mm)

Height from Crankshaft Center to Rocker Cover: 4.7" (119mm)

Height from Crankshaft Center to Muffler Center: 3.2" (82mm)

Distance from Crankcase Center to Prop Hub: 0.27" (77mm)

Width at Mounting Tabs: 2.6" (67mm)

Width of Crankcase Below Mounting Tabs: 1.9" (48mm)

Width of Cylinder Head: 2.2" (58mm)

Distance from Carburetor to end of Crankshaft: 6.8" (172mm)

Distance from Carburetor to Crankcase Center: 2.3" (58.5mm)

Distance from Carburetor to Prop Hub: 5.3" (135.5mm)