Fabricante: PHOENIX MODELS

Phoenix Model Super Cub PA-18 30cc Gas/EP ARF 107" PMMA1695

221955


Disponibilidade: Em Estoque

Aviso: Últimas unidades!


U$ 799.00

10x de U$ 79.90
Valor oficial: U$ 799.00


CEP:

 
Calcular
 
 
 



FEATURES

Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron and Flap Control: Dual servo
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Cowl Pre-painted Fiberglass
Canopy: Clear with painted-on frame lines
Landing Gear: Scale shock absorbing steel main gear,aluminum tail
gear
Wheels: Two 4.25" (108mm) foam main, one 1" (25mm) tail wheel
Fuel Tank: Approximately 16oz (473cc)
Motor Mount: Three plywood plates with aluminum standoffs
Engine Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty

 

 

INCLUDES

ARF Super Cub 30cc Airplane with Landing Gear, Wheels, Fuel Tank,
Instrument Panel, Decals, Pilot, Instruction Manual

 

 

REQUIREMENTS

For Gasoline Operation;
Engine: 30cc 2/stroke

For Electric Operation;
Brushless Motor: Rimfire 1.60
ESC: 120-160A
LiPo Battery: 12S up to 5000 - 6000mAh (not carried)
LiPo Charger: To match selected battery
Propeller: 18x8 E APC

Radio: 6-channel
Servos: Eight standard high-torque (2-aileron; 2-flap; 2-elevator;
1-rudder; 1 throttle)
Y-Harness: For ailerons
Receiver Battery: 6V NiMH, at least 2400mAh
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.

 

 

SPECIFICATIONS

Wingspan: 107" (2720mm)
Weight: 19 - 20lb (9 - 9.5kg)
Length: 68.6" (174.2m)
Wing Area: 1705 sq in (110 sq dm)
Wing Loading: 26.54 oz sq/in (81 sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 4.3" (109mm) Back from the wing's leading edge
measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.39" (10mm) 12% expo 0.47" (12mm) 12% expo
Rudder: 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo
Ailerons: 0.39" (10mm) 10% expo 0.47" (12mm) 10% expo
Control Throw Flap: mid, (15mm) down, landing 20mm down

 

 

COMMENTS

If a replacement fuel tank is needed the DuBro 16oz Fuel Tank
DUBQ0216 can be used. Some trimming and modification may be
required when installing any aftermarket fuel tank.

Tandem seat triumph

The Piper Cub was produced in the early thirties and forties and quickly became one of the most beloved light aircraft of all time. Its successor, the Super Cub, was produced from 1949 to 1994 and continued the tradition of maneuverability and ease of flight started by the original. This model is 3D engineered to produce precision parts that match perfectly with the full scale version. It features removable wings for easy transportation, and is pre-cut and pre-sheeted for quicker construction.
  • Pre-covered in high-quality film
  • Plug in wings for easy transport and setup
  • Strong, light construction
  • Superb flight characteristics
  • Accurate scale details
  • Full hardware included
Phoenix Model Super Cub PA-18 GP/EP ARF 107in - GP/EP Compatibility
Designed for GP/EP compatibility
Phoenix Model Super Cub PA-18 GP/EP ARF 107in - Pilot and Cockpit
Full cockpit and instrument panel
Phoenix Model Super Cub PA-18 GP/EP ARF 107in - Construction
Top quality balsa and light plywood construction
Phoenix Model Super Cub PA-18 GP/EP ARF 107in - Includes
Includes everything you see here!


ProdutosRelacionados