Disponibilidade: Este produto está esgotado
Aviso: Últimas unidades!
Data de disponibilidade:
Modern Design, Superior Performance
Cirrus designs some of the most innovative private-ownership aircraft in the world. This Great Planes model strives to duplicate the design features and elegance of the originals in a model that is fun to fly and easy to assemble. This model operates with either glow or electric power depending on your personal preference. Pick glow for more realistic sound or electric for ease of installation and maintenance. Many assembly steps are already completed to get you into the air more quickly. The fuselage is pre-painted fiberglass, the wings align on a joiner tube and attach with thumb screws and the flaps, ailerons and rudder are pre-hinged. Once you pick up your Cirrus, pick out your power system and electronics and put the final touches on assembly there's only one thing left to do: enjoy every moment of effortless flight.
A painted fiberglass fuselage captures the original's sleek look
Navigation lights add realism to your aircraft and make it easier to fly at dusk
Easily accepts glow or electric setups
The interior includes a dashboard and seat backs for a realistic look. Pilot figures are available separately.
Bright landing and navigation lights add an extra touch of realism to your plane and make it easier to fly at dusk.
An easily removable hatch gives you quick access to the large space available for onboard equipment and or flight batteries.
A fiberglass cowl and polished aluminum spinner add to the exquisite scale looks of the aircraft on the ground and in the air.
The flaps, ailerons and rudder are all pre-hinged which saves you big time during final assembly.
Includes scale wheel pants for even more authenticity.
Construction: Wooden wing and tail structures fiberglass fuselage & cowl, prehinged ailerons, flaps and rudder
Wings: Balsa and ply, two-piece
Aileron Control: Dual servo
Covering: Top Flite MonoKote on wing and tail surfaces
Fuel Tank: Approximately 14oz (414ml)
Engine Mount: Two-piece composite
Motor Mount: Plywood, may be assembled to fit the Great Planes RimFire .55 or the O.S. .50 brushless motors
Landing Gear: Two piece composite main gear, prebent steel nose gear wire with three 2" (50mm) diameter foam wheels
Spinner: Machined and polished aluminum 2-1/4" (57mm) diameter
Lights: Navigation and landing
Cirrus SR22T Airplane with Spinner, Landing Gear, Canopy, Decals Running and Landing Lights and Instruction Manual
Standard Servos: Three (1-elevator, 1-rudder, 1-throttle)
Micro Servos: 04 (2-aileron, 2-flap)
6" (152mm) Servo Extension: One (for electric power only)
9" (229mm) Servo Extension: Two
16" (406mm) Servo Extension: Two
Y-Harnesses: Two Switch Harness Charge Jack
Receiver Battery: At least 1600mAh
.46-.55 cu in (7.5 - 8.9cc) glow engine
42-60-480 brushless motor, ESC, LiPo battery and compatible charger Propeller, building and field equipment.
Wingspan: 69" (1753mm)
Wing Area: 493 sq in (31.8 sq dm)
Wing Loading: 35-39oz/sq ft (107-119g/sq dm)
Weight: 7.5-8.25lbs (3400-3740g)
Length: 47.75" (1213mm)
Center of Gravity (CG): 2-1/4" (57mm) back from the leading edge of the wing at the fuselage sides
Control Throws High Rate Low Rate
Elevator: Up & Down: 7/16" (11mm) 17° 5/16" (8mm) 12°
Rudder: Right & Left: 1" (25mm) 30° 5/8" (16mm) 18°
Ailerons: Up & Down: 3/4" (19mm) 21° 5/8" (16mm) 17°
Flaps: Down: 1-1/2" (38mm) 35°
Does not include pilot figure.