INDIC.CARGA 4.8~6V HOBB.VOLTWATCH 0332

This is the VoltWatch2 on-board Receiver Battery Monitor for 4.8V and 6V NiCd and NiMH receiver packs.

This mounts on the outside of the airplane, so you can see at a glance the status of the receiver battery mounted inside.

FEATURES:

7-LEDs provide instant, accurate battery voltage status of Low, Safe, or Max.

Only one LED glows at a time

Small switch to select 4.8V or 6V battery

Very lightweight, only .15oz (4.3g) unit can mount on the side of the fuselage, or under the plane's canopy

Draws amazingly low current - from 4-34mA depending on the battery voltage

Plugs into any open receiver channel using a Futaba J connector

One year warranty

INCLUDES:

One VoltWatch2 On-Board Receiver Battery Monitor w/Futaba J plug

One 1.5"x1" piece of double sided mounting tape

REQUIRES:

Plugging into any unused receiver port

Mounting onto the airplane with double-sided tape

SPECS:

Length: 1.65" (42mm)

Width: .63" (16mm)

Height: .16" (4mm)

Weight: .15oz (4.3 grams)

Current Draw: approx 4-34mA

Lead Length: 198mm (7.79")

COMMENTS:

This has a Futaba J connector pre-installed. For radios other than Futaba, you will have to change or modify the plug.

Because of reverse polarity, if you would like to use this with the older Airtronics batteries, you must also purchase AIRM4400