GYRO GY520 + BLS254 FUTABA FUTM0814

This is the Futaba GY520 Heading Hold Gyro with the BLS254 Digital Brushless Servo.

FEATURES:

Ultra small and light weight gyro contained in one unit-no separate sensor and control unit

Utilizes a high speed advanced PID (Proportional-Integral-Derivative) control algorithm

Latest MEMS (Micro-Electro-Mechanical Systems) allows complete control system on one chip

Delivers superior performance with analog servos and excels with digital servos
F3C and 3D mode selectable, six programmable parameters

Operates at very high speed; 280Hz in the 1520uS mode and 506Hz in the 760uS mode

Programmable through single button and multi-color LED or through a PC using

Futaba CIU-2 USB adapter

Registered AVCS (Angular Velocity Control System) architecture achieves unmatched tail holding ability

BLS254 Servo-(FUTM0524)

Designed for 3D helis

Standard size

Equipped with two ball bearings

30% faster response than standard digital servos and five times longer lasting than servos with brushed motors

Same power consumption as brushed digital servos

One year limited warranty on both components beginning at date of  purchase.

INCLUDES:

Futaba GY520 Heading Hold Gyro, instruction manual, one each 13" (330mm) lead with red connectors and lead with black connectors two sections of sensor tape, mini screwdriver, manual

Futaba BLS254 Brushless Heli Rudder Servo with universal connector (21mm) diameter round horn, 1.8" (45mm) diameter round horn 1.2" (32mm) diameter 6-point horn, 1.5" (38.8mm) diameter 4-point horn mounting screws, eyelets and grommets

REQUIRES:

Installing in helicopter and programming following instructions in manual

SPECS:

GY520 Gyro-

Size: 0.82 x 0.82 x 0.43" (20.8 x 20.8 x 11mm)

Weight: 0.243 oz (6.9g)

Voltage Range: 3.8 - 6.0V DC

Control System: Advanced PID control

Current Draw: 40mA (without servo)

Sensor: MEMS vibrating structure gyro

Operating Temperature: 14°F - 113°F (-10°C - +45°C)

Sensor Rate Range: +/- 800° sec

Angular Velocity Range: +- 800 deg/sec

BLS254 Servo-

Torque: 53 oz-in (3.8kg/cm) @ 4.8V

Speed: 0.06 sec/60° @ 4.8V

Size: 1.60 x 0.80 x 1.50" (40 x 20 x 36.8mm)

Weight: 1.80 oz (51g)