AVIAO SEAGULL 2000 POWERED GLIDER ARF SEA130

Seagull 2000 Glider ARF

The SEAGULL 2000 is designed for the sport trainer pilot.
It's a high-wing monoplane that's quick to assemble and easy to fly. The airframe is conventionally constructed from balsa, plywood, and veneer to make it stronger than the average ARTF model, yet the design allows the aircraft to remain lightweight. You'll find that most of the work has been done for you. The pushrods are pre-cut to the correct lengths, the engine mount is installed, and the hinges are pre-installed and pinned for safety.

Features:

• An attractive, lightweight, and easy-to-fly glider model
• Expertly constructed airframe with black and white foil finish
• Large space for the elevator servo in the tail fin
• Build difficulty: Medium
• Assembly time approx.: 5h-7h

Specifications:

• Wingspan [mm]: 2000
• Length [mm]: 941
• Take-off weight approx. [g]: 1000
• Area [dm³]: 31.5
• Material: Balsa
• Finish: Iron-on foil
• RC functions: Elevator, aileron, and motor

In the Box:

• 1x Airplane ARF kit including:
• Prefabricated fuselage
• 2-piece wing with pre-installed ailerons
• Horizontal stabilizer with elevator
• Canopy
• All pushrods, control horns, screws, nuts, and small parts
• Illustrated assembly instructions (English)

Required accessories (recommended, not included):

• 1x transmitter + receiver (4-channel and above)
• 3x servos (e.g., Torcster Micro Servo NR-62 MG Digital 12g)
• 1x BL-Motor (e.g., Torcster Gold A2836/8-1260)
• 1x BL-Speed ​​Controller (e.g., Torcster ECO 30A V2)
• 1x propeller (e.g., CAMcarbon blades 10x4")
• 1x center section (e.g., Reisenauer clamp-on center section 52/8 - 4mm shaft)
• 1x spinner cap
• 1x LiPo 3S (11.1V) flight battery, approx. 2200mAh (e.g., SLS Xtron 2200mAh 3S1P
• 11.1V 30C/60C)
• 1x suitable charger with charging cable