CARRO OFNA HYPER SS PLUS 1/8 14358
- Código: 188500
- Marca: OFNA
- Estoque: Indisponível
-
$399,99
Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.
FEATURES
- Chassis: Countersunk aluminum, orange in color, aluminum side rail skirts
- Roll Cage: Tubular aluminum, orange in color
- Drive: Four wheel shaft
- Differentials: Front center and rear, bevel gear type
- Engine: JL .32 cu in (4.5cc) with slide valve carb, two-stage air filter, pull starter, 2.9HP @ 39,000RPM
- Tuned Pipe: Polished aluminum
- Clutch Bell: 14T steel
- Radio: 3-ch Ofna HT-2.4EF FHSS, with dual rate steering, and Savox metal gear steering servo
- Radio Tray: Composite one-piece with battery and receiver box
- Suspension: C-hub for high clearance to prevent chassis scrub, front and rear sway bars
- Shocks: Oil-filled 17mm Big Bore, hard coated black anodized bodies, 4mm shafts
- Shock Towers: Aluminum, 0.16" (4mm)
- Tires: Rectangular pattern with foam inserts, outer diameter 5.3" (136mm), width, 2.5" (63.5mm)
- Wheels: Dish type black in color, diameter 3.8" (96mm), width 2.2" (57mm), 17mm hexes
- Rear Wing: High-impact nylon wing black in color
- Ball Bearings: Full set, rubber sealed
- Fuel Tank: 5oz (150cc) with fuel filter
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable front & rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
INCLUDES
RTR Hyper SS Cage Off-Road Buggy with Engine, Radio, Air Filter, Fuel Filter, Glow Plug, Rear Wing and Instruction Manual
REQUIREMENTS
- AA Batteries: Twelve, eight for transmitter, four for radio box
- Glow Fuel: Car blend with 15-30% nitro content (20% for break-in) Glow Igniter, Fuel Bottle, Maintenance and Track Equip.
SPECIFICATIONS
- Length: 18.1" (460mm)
- Width: 16.5" (419mm)
- Height: 7" (178mm)
- Wheelbase: 14" (356mm)
- Front and Rear Track: 16.5" (419mm) outer edges of wheels side-to- side
Carburetor Settings-
- Needle Valve: 3 - 3-1/2 turns from closed, adjust for maximum RPM and power without being too lean or too hot
- Low Speed Needle: Set needle to flush, turn clockwise to lean, or counterclockwise to richen. Do not adjust until needle valve is set for power and top speed
- Barrel Stop Screw: Adjusts idle. Set for 1/16: gap to start new engine, open more for faster idle