HS 311 SERVO HITEC 3.3KG .19SE 31311S

A = .780” (19.82mm)

B = .530” (13.47mm)

C = 1.33” (33.79mm)

D = .400” (10.17mm)

E = .380” (9.66mm)

F = 1.19” (30.22mm)

G = .460” (11.68mm)

H = 1.05” (26.67mm)

J = 2.08” (52.84mm)

K = .368” (9.35mm)

L = .172” (4.38mm)

M = 1.57” (39.88mm)

X = .120” (3.05mm)

Specs:

Dimensions: 1.57" x 0.78" x 1.43" (39.88 x 19.81 x 36.32mm)

Product Weight: 1.52oz (43g)

Output Shaft Style:  24 tooth (C1) spline

Voltage Range: 4.8V - 6.0V

No-Load Speed (4.8V): 0.19sec/60°

No-Load Speed (6.0V): 0.15sec/60°

Stall Torque (4.8V): 42 oz/in (3.0 kg/cm)

Stall Torque (6.0V): 51 oz/in (3.7 kg/cm)

Max PWM Signal Range (Standard): 575-2460μsec

Travel per µs (out of box): .107°/μsec

Max Travel (out of box): 202.5°

Pulse Amplitude: 3-5V

Operating Temperature: -20°C to +60°C

Current Drain - idle (4.8V): 7.4mA

Current Drain - idle (6.0V): 7.7mA

Current Drain - no-load (4.8V): 160mA

Current Drain - no-load (6V): 180mA

Continuous Rotation Modifiable: Yes

Direction w/ Increasing PWM Signal: Clockwise

Deadband Width: 5µs

Motor Type: Cored

Potentiometer Drive: 4 Slider/Direct Drive

Feedback Style: 5KΩ Potentiometer

Output Shaft Support: Top Resin Bushing

Gear Type: Straight Cut Spur

Gear Material: Nylon

Wire Length: 11.81" (300mm)

Wire Gauge: 25AWG