HELIC.AXE 400 3D RTF 2.4GHZ S/B HMXE0800

This is the electric powered, radio controlled, ready to fly Heli-Max Axe 400 Aerobatic Mini Helicopter.

 

 

Airframe: Rigid molded two piece design Radio: Futaba 6EX 6-channel 2.4GHz system with four high-torque Futaba S3114 micro servos and R606FS 2.4GHz FASST receiver Gyro: Heli-Max Pro heading lock with dual remote and mechanical gain adjustments, tail boom mounted allows drive belt adjustments without changing tail linkage Electronic Speed Control: 25A brushless with 2A BEC and Deans Ultra plug connectors Motor: Pro Series 425 size outrunner brushless with built-in cooling fan 120° eCCPM: Uses direct link system to minimize parts count and possible crash damage and to enhance 3D flight performance Blades: Wooden, 12.8" (325mm) in length Tail Boom: Aluminum, black in color Ball Bearings: Full set included Canopy: One-piece molded with printed trim scheme and tinted windshield

 

 

Heli-Max Axe 400 Aerobatic Mini Helicopter, brushless motor, 2.4GHz Futaba radio system, ESC, blades, decals, instruction manual

 

 

Battery Pack: 11.1V LiPo, GPMP0406 sport pack with Deans connector AA Batteries: Eight for transmitter Charger: LiPo compatible Balancer: To balance cells in battery pack

 

 

Main Rotor Diameter: 27.5" (699mm) Length: 24" (610mm) Weight: 21 - 25oz (610 - 700g)

 

 

The following batteries are recommended upgrade options; GPMP0617 2100mAh 20C Balance Power Series with Deans connector GPMP0520 2200mAh 25C Power Series FPWP0321 1800mAh 25C Balance, no connector, lightweight option FPWP0327 2170mAh 25C Balance, no connector, high burst amps FPWP0123 2500mAh 20C Balance, no connector, high mAh rating Immediate 3D aerobatics — in Ready-to-Fly and Receiver-Ready (Rx-R) versions!

 

425-Size Brushless Motor

 

HM4000 Heading Lock Gyro

 

Use the Axe 400 RTF’s 2.4GHz Futaba 6EX radio to fly other aircraft equipped with a FASST receiver — and extend the advantages you enjoy from this system throughout your entire fleet.

 

2.4GHz spread spectrum speed, reliability and simplicity.

 

R606FS FASST receiver and four S3114 high-torque micro servos.

 

Great for all of your helicopters and airplanes!

 

 

425-Size Brushless Motor 

 

Brushless Electronic Speed Control 

 

HM4000 Heading Lock Gyro 

 

Four Futaba S3114 High-Torque Micro Servos

 

Just add your choice of:

 

6-Channel Heli Radio Transmitter & Receiver

 

11.1V 2000-2500mAh LiPo Battery Pack

 

Battery Balancer & LiPo-Compatible Charger

 

- The Axe 400’s stable, easy-to-adjust, belt-driven tail is topped off with white fins and white rotor blades that improve visibility.

 

- The Axe 400 includes the largest power plant of any ready-to-fly heli in its class — a 425-size out-runner brushless motor with built-in cooling fan.

Futaba S3114 High-Torque Micro Servos —

 

Very light weight with fast transit speeds.

 

 

Weight: 0.3 oz (8.5 g)

 

Torque (4.8V): 20.1 oz-in (1.45 kg-cm)

 

Speed (4.8V): 0.10 sec/60°

 

 

Axe 400 RTF HMXE0800

 

Axe 400 Rx-R HMXE0801

 

Main Rotor Diameter: 27.5 in (699 mm)

 

Length: 24 in (610 mm)

 

Weight w/o Battery: 18.5 oz (520 g)*

 

Requires: 2000-2500mAh 11.1V LiPo battery pack, balancer, LiPo-compatible

charger & 8 “AA” batteries.

 

Rx-R also requires 6-channel heli radio & receiver.

 

* Flying weight of 21 - 25 oz. (610-700 g) is typical depending on your selection of required components.