MOTOR OS .21 B2102 SPEED COPMPETIT 1A300

Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.

This is the O.S. Engines Speed B2102 1/8 scale Competition Buggy Engine with the T2090SC Tuned Pipe.

FEATURES

Low cylinder head reduces the buggy's center of gravity by 0.67" (17mm) for better stability during aggressive driving

Tuned pipe is constructed of aluminum with polished natural finish and has an EFRA-2089 noise rating

INCLUDES

REQUIREMENTS

SPECIFICATIONS

Engine:
- Displacement: 0.211 cu (3.46 cc)
- Bore: 0.646 in (16.40 mm)
- Stroke: 0.646 in (16.40 mm)
- Practical RPM: 4,000-42,000
- Power Output: 2.65 PS/2.61 hp @ 34,000 rpm
- Crankshaft Size: UNF1/4-28
- Distance/Mounting Hole Centers Same Side: 0.83" (21mm)
- Distance/Mounting Hole Centers Opposite Side: 1.45" (37mm)
- Width of Crankcase below Mounting Tabs: 1.2" (31.6mm)
- Width of Mounting Tabs: 1.8" (45mm)
- Height/Mounting Tab to top of Cylinder Head: 2.6" (65.9mm)
- Height/Mounting Tab to center of Exhaust Outlet: 1.1" (28mm)
- Height Crankcase Bottom to top of Cylinder Head: 3.2" (81.5mm)
- Length of Crankshaft end to Front Bearing: 1.2" (29.5mm)
- Length of Crankshaft end to Backplate: 3.7" (94mm)
- Length of Crankshaft end to Center of Crankcase: 2.9" (73.5mm)

Carburetor Settings:
- (Carburetor is preset from factory and should only require very small adjustments)
- Needle Valve: 3 turns open from fully closed
- Mixture Control Valve: One turn screwed in from flush position with carb body
- Metering Needle: 0.3-0.4mm protruding from flush position with carb body
- Throttle Stop Screw: Approximately 0.5mm from carb body when viewed from above

T2090SC Tuned Pipe:
- Length: 6.6" (167mm)
- Diameter: 1.4" (35.2mm)
- Exhaust Outlet Diameter: 0.31" (8mm)

$449,00