O que você está buscando?


  • Código: 285834
  • Estoque: Disponível
  • $3.199,99


Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.

The Mammoth 250 SE Turbine Engine, 56.2 lbs Thrust, by Jet Central

Note: JetCentral turbines dropship directly from the factory in a timely manner.

NEW! Jet Central "SE" Smart Electronics ECU System:

  • Metallic robust HDT
  • Safety acceleration flameout prevention
  • Self-adjusting features
  • Easy fine tuning, do more with less adjustment
  • Simple, graphic navigation menus
  • Keep track of your telemetry with an easy to use interface
  • One-click altitude compensations
  • All the information you need in an easy to read display

A powerful turbine producing 23 kg (50.5 lbs) of thrust ready to fly all the big Jets. The JET CENTRAL TURBINES ENGINES are in its own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

  • Kerosene Start
  • Engine ready for installation, with the newest in ECU's.
  • All motors tested at over 6000 ft.
  • Lifetime Warranty

Mammoth Turbine Complete Set with Auto Start includes

  • I.C.S (Intelligent Control System)
  • HDT (Hand Data Terminal and Programmer)
  • Fuel pump
  • Electronic starting gas valve
  • Electronic fuel valve
  • Fuel tubing, tubing connector set, filters, and cable set
  • 3S 5000mAh 9.9V Duralite LiFePo Battery Pack
  • Turbine SAFETY mounting clamps
  • Detailed instruction manual
  • Case


  • Thurst: 250 Newtons. 25.49 KG – 56.2 LB
  • Idle Thrust: 0.8 K (1.7 Lbs) @ 28,000 RPM
  • RPM Range: 28,000 – 104,000 RPM
  • Weight: 2.24 Kg (5.2 Lbs) with starter
  • Exhaust Temperature: 500ºC – 750ºC (932º F – 1292ºF)
  • Fuel: Jet A1, 1-K Kerosene, Diesel
  • Fuel Consumption: 0,7 Lt/min (23 oz/min) @ 104,000 PM 0.5 Lt/min (17oz/min) Average
  • Lubrication: 2.5% Turbine Oil Mixed in the fuel
  • Maintenance Interval: 25 hours

Escreva um comentário

Você deve acessar ou cadastrar-se para comentar.