AVIAO PHX EXTRA 300S 46-55 ARF PMMA1540

Phoenix Model Extra 300S .40-.46 ARF PMMA0540

• This is the radio controlled, glow powered,
• Almost-Ready-to-Fly,
• Phoenix Models Extra 300S .46 scale Airplane.
• For intermediate to advanced fliers.

FEATURES

• Construction: Balsa and plywood Wings:
• One-piece Covering: Adhesive backed factory applied, color scheme is Red with a thick White stripe on the wing and fuselage
• Radio Compartment: Plywood reinforced
• Cowling: Pre-painted fiberglass
• Canopy: Clear, single with painted pilot figure
• Wheel Pants: Pre-painted fiberglass
• Landing Gear: Pre-formed aluminum, 0.12" (3.5mm) thick, 0.078" (2mm) diameter tailgear, 2.25" (57mm) main wheels, 1" (25mm) tailwheel
• Aileron Control: Dual servo
• Building Time: Ready to fly in several hours

INCLUDES

• Pre-built and covered wings
• fuselage and tail assemblies
• pushrods
• pre-bent main landing gear
• tailwheel wire
• 2.25" (57mm) main wheels
• 1" (25mm) tailwheel
• nylon engine mount
• fuel tank
• wood servo trays
• 2.25" (57mm) spinner
• wing joiner
• 6.5" x 10" (165mm x 250mm) foam padding
• pilot figure
• decals
• hardware package
• photo-illustrated instructions.

REQUIRES

• Engine: .46 cu in (7.5 cc) 2-stroke OR .52 cu in (8.5 cc) 4-stroke
• Muffler: Sports-Style supplied with engine, engine mounts in upright position
• Radio: 4-Channel
• Servos: 5-Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
• Servo Extension 6": Two, for aileron servos Y-Harness: One, for aileron servos

SPECS

• Wingspan: 56.75" (1441mm)
• Weight: 6 lbs (2760g) approximate
• Length: 50.3 " (1280mm)
• Airfoil: Fully-symmetrical, low-wing Center of Gravity: 3.5" (90mm) Back from the wing's leading edge at the fuselage
• Control Throws- Elevator: Up & Down 0.43" (11mm)
• Rudder: Right to Left 0.79" (20mm)
• Ailerons: Up & Down 0.31" (8mm)