GYRO GP750 C/ SERVO DS420 ALIGN KX870017

GP750:

•  Utilizes Silicon Micro Machines (SMM) sensor with excellent stability to dramatically reduce in-flight tail drifts.
•  Utilizes AHTCS (Active Helicopter Tail Control System) to compensate any drift caused by wind direction and force, as well as unintended yaw induced by helicopter itself during flight maneuvers.
• Tailor made specifically for use with high speed digital rudder servos. This gyro
• festures high sensitivity and minimal reaction time, fully utilizing the potential of modern high speed digital rudder servos.
•  Suitable for all sizes of helicopters, from micro indoor to large 90 size glow helicopters.
•  Metallic dampening plate built into bottom gyro casing, dramatically increasing anti-vibration and anti-interference abilities.
• Features 1520μs pulse wide and 760μs narrow pulse wide frame rate.
•  Digital/Analog servo switchable.
• Reverse switch.
• Rudder servo travel limit adjustment (ATV).
• Mode switch for large/mini helicopter.
• Delay adjustment.
• Gyro locking mode and gain can be adjusted remotely from the transmitter.

1.Mini/Micro heli mode, suitable for T-REX250/450(“STATUS” Red);Medium/large heli mode, suitable for T-REX500/600/700(“STATUS" Green)

2.There are 3 kinds of 760μs narrow pulse wide servos on the market, including Futaba S9251, S9256, BLS251.

DS420:

• Fast speed and high torque. High strength metal gears with high precision and durable structure characteristics.
• Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
• Supports digital & analog control signal.
• Precise servo, suitable for T-Rex 250 rudder use.

Specification:

• GP750 Ratings:
• Operating Voltage:DC 4.5~7V
• Current Consumption:<80mA @ 4.8V
• Angular Detection Speed:500 degrees/sec
• Operating Humidity:0~65
• RoHS certification.
• Operating Humidity:0%~95%
• Size:26x25x11mm
• Weight:14g

DS420 Ratings:

•  Stall torque:0.75kg.cm(4.8V)
• 1.0kg.cm(6.0V)
•  Motion speed:0.08sec/60°(4.8V)
• 0.06sec/60°(6.0V)
• Rating voltage:DC 4.8-6V
•  Temperature range:-20°C~+60°C
•  Dimension:22.8 x 12 x 25.4mm
•  Weight:12.7g

Accessories: 

•  Double sided tape x 2
•  Servo rudder piece x 4
•  Set screw x 1
• Tapping screw for servo x 2