O que você está buscando?





MOTOR OS FS-95V (60PA) 4T W/MUFFLER F-5050 30900

  • $399,00

Compartilhar

Não fazemos entregas fora do paraguai
Preços informados são em Dólares americanos, não incluem IVA e podem variar sem prévio aviso.


This is the O.S. Engines FS-95V Four Stroke Aircraft Engine.

 

FEATURES:

  • Broad power band for a wide variety of airplanes including models designed for .60 2-stroke and .90 4-stroke engines
  • Redesigned cylinder head to match angled valve layout for steady power at all times and a perfect balance between high combustion and efficient cooling
  • Redesigned "Jet Stream" muffler with unique shape for more authentic four stroke sound
  • Same mounting dimensions, drive hub position and linkage position as the O.S. FS-91 Surpass II, 61FX, 65LA, 75AX, 95AX and FS-110
  • Two year limited warranty through Hobby Services beginning at date of purchase


INCLUDES: 

  • O.S. Engines FS-95V Four Stroke Engine with Type F Glow Plug, Muffler Header Pipe with two Locknuts and Instruction Manual


REQUIRES: 

  • Fuel: 5-20% nitromethane aircraft blend with 18% lubricant content
  • Propeller: Sport & Aerobatic 13x7-9, 14x6-8
  • Scale 15x6-8

 

SPECS:  

  • Carburetor Settings
  • Needle Valve: 2-1/2 - 3 turns from fully closed
  • Mixture Control Valve: Rotate until slotted head is flush with carb body. After setting needle valve, rotate mixture control valve approximately 45° clockwise to lean the mixture or 45° counter- clockwise to richen mixture
  • Displacement: 0.951cu in (15.59cc)
  • Bore: 1.142" (29.0mm)
  • Stroke: 0.929" (23.8mm)
  • Practical RPM: 2,100 - 11,000RPM
  • Power Output: 1.7ps/10,000RPM
  • Weight: 20.88oz (592g)
  • Muffler Weight: 2.05oz (58g)
  • Crankshaft Size: 5/16-24
  • Height from bottom of Mounting Tab to Pushrod Cover: 3.8" (97.5mm)
  • Height from bottom of Crankcase to Pushrod Cover: 4.7" (119mm)
  • Distance from Carburetor to Drive Hub: 4.5" (115.7mm)
  • Distance/Mounting Hole Centers Same Side: 0.98" (25mm)
  • Distance/Mounting Hole Centers Opposite Side: 2" (52mm)
  • Mounting Hole Diameter: 0.16" (4.2mm)
  • Distance from Drive Hub to end of Crankshaft: 1.5" (37.4mm)
  • Distance from Drive Hub to center of Engine: 2.6" (66.5mm)
  • Width at Mounting Tabs: 2.4" (61mm)
  • Width Below Mounting Tabs: 1.7" (42.6mm)
  • Height/Mounting Tab Bottom to center of Needle Valve: 0.70" (17.8mm)

Escreva um comentário

Você deve acessar ou cadastrar-se para comentar.