CARRO EB-4 G3 BRUSHLESS RTR 2.4GZ 6400-F

This is the 2.4GHz radio controlled, electric powered, ready to run,
            1/8 scale Thunder Tiger EB-4 G3 Buggy with Yellow Body.
                 Compatible with most EB4 S3 Series Parts.

FEATURES: Chassis: 0.12" (3mm) thick aluminum
          Drive: Four wheel shaft
          Motor: Thunder Tiger Ripper 2000kV BL-40/20 Brushless
          Radio: Ace Cougar PS3i 3-channel 2.4GHz with metal gear steering
            servo
          ESC: 80A with cooling fan
          Shocks: Oil-filled large volume aluminum bodied
          Shock Towers: 0.16" (4mm) thick aluminum
          Pinion Gear: 13T steel
          Spur Gear: 50T composite
          Differentials: Front, rear and center planetary type
          Body: Trimmed and painted with yellow color scheme, molded plastic
            rear wing
          Tires: Rectangular pin 1.6" (40mm), 4.3" (110mm) diameter, with foam
            inserts
          Wheels: 16-spoke, white in color 1.6" (40mm) wide, 3.1" (79mm)
            diameter, 17mm hubs
          Steering: Bellcrank type with four ball bearings
          Caster: Adjustable, caster/toe-in refers to the angle of the
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle
          Warranty: Thunder Tiger guarantees this buggy to be free from defects
            in both material and workmanship. This warranty does not cover any
            components damaged by use or modification. A part or parts missing
            from the kit must be reported within 60 days of purchase. No part
            or parts will be sent under warranty without proof of purchase

INCLUDES: Thunder Tiger EB-4 G3 Buggy with brushless Motor, 2.4GHz 3-ch Radio,
            Metal Gear Steering Servo, Painted Body, Rear Wing, Instruction
            Manual, Deans to 4mm Bullet Adapter and 4mm Battery Connector

REQUIRES: AA Batteries: 8 for transmitter
          LiPo Batteries: Two 7.4V hard case, at least 5000mAh
          Battery Charger: LiPo compatible
          Building and track equipment

SPECS:      Vehicle-
          Length: 19.3" (490mm)
          Width:  12" (305mm)
          Wheelbase: 12.6 - 12.9" (320mm - 330mm)
          Weight: 7lbs (3160g)
          Final Drive Ratio: 12.7:1
            Body-
          Length: 12.5" (318mm)
          Width:   8.2" (208mm)
          Height:  3.8" (97mm)

COMMENTS: For replacement or to upgrade to ball bearings use:
            Qty.  Size      Location                  Qty.  Bearing Set
             2   8x16mm  Front Bulkhead                1     DTXC1585
             2   8x16mm  Rear Bulkhead                 1     DTXC1585
             4   5x10mm  Steering System               2     DTXC1535
             2   8x16mm  Fr Diff Assembly              1     DTXC1585
             2   8x16mm  Center Diff Assembly          1     DTXC1585
             2   8x16mm  Rear Diff Assembly            1     DTXC1585
             2   10x19mm Fr Hubs                       1     TTRC1969
             2   8x16mm  Fr Hubs                       1     DTXC1585
             2   10x19mm Rear Hubs                     1     TTRC1969
             2   8x16mm  Rear Hubs                     1     DTXC1585