CARRO PULSE 4.6 BUGGY RTR 1/8 HPI 107020

This is the glow powered, 2.4GHz radio controlled, ready to run 1/8 scale Pulse 4.6 Buggy Racer from HPI.

FEATURES:

• Chassis: 6061 aluminum 0.12" (3mm) thick with front and rear rod braces
• Drive: Four wheel shaft, with steel outdrives and axles
• Engine: HPI Nitro Star K4.6 HO .28 cu in, 2.9hp, pull starter two-stage air filter with splash guard to prevent engine from getting flooded with water in wet conditions, composite 2-needle carb, ABC construction, large heatsink for efficient heat dissipation, upgradable to the Roto Start 2 for easy push button starting (Roto Start 2 not included, order HPIP7130)
• Radio: 3-channel 2.4GHz with end point adjustment, servo reversing, steering dual rate, failsafe and high-torque metal gear steering servo
• Radio Tray: Low profile aluminum
• Fuel Tank: 5.4oz (125cc)
• Differentials: Bevel Gear type, silicone oil filled
• Shocks: Oil-filled, 15mm diameter large bore
• Shock Towers: Front, 7075 aluminum, rear 6061 aluminum
• Brake: Dual drilled steel discs with fiber brake pads
• Suspension: Assembled with steel hex head screws with locknuts, extra strong suspension arms, 2.5mm front swaybar and 3mm rear swaybar
• Clutch: Three shoe, 14T steel clutch bell
• Steering: Bellcrank type with 6061 aluminum steering link with three adjustment holes
• Ball Bearings: Full set, rubber sealed
• Body: Painted and trimmed buggy body with white molded rear wing
• Bumpers: Front plastic
• Wheels: Turbine design, white in color with 17mm hexes
• Tires: Soft compound mini-pin Trekker tires with foam inserts
• Ball Bearings: Full set
• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
• Ackerman: Adjustable, Ackerman refers to the effect of the inside front wheel rotating faster than the outside front wheels during turns 

INCLUDES:

RTR 1/8 scale Pulse Buggy Racer, .28 cu in Engine w/Pull Starter Body, Decals, 3-channel 2.4GHz Radio, eight AA Batteries and Instructions

REQUIRES:

Glow Fuel: Car blend with 10-20% nitro content Glow starter, fuel bottle, building and track equipment

SPECS:

Vehicle-

• Length: 18.7" (475mm) including wing
• Width: 11.8" (300mm)
• Height: 6.1" (155mm)
• Weight: 7.3lbs (3300g)

Body-

• Length: 13.4" (342mm)
• Width: 7.7" (196mm)
• Height: 4" (102mm)